Ricoh FT5535 Service Manual page 103

OTHER COPY IMAGE ADJUSTMENTS
Mode No.
SP2-101-001 Leading Edge Erase Margin
SP1-001 Registration
SP4-008 Vertical Magnification
SP4-101 Horizontal Magnification
SP4-103 Focus Adjustment
SP4-011 Lens Horizontal H.P. Adjustment 0-32 (0.2 mm/step)
3.3 DATA DISPLAY
The following table shows SP modes for displaying adjusted or detected values,
or counter values.
Mode No. Displayed Data
1-106 Fusing Temperature
2-002 Drum Charge Roller Voltage
2-206 Development Bias
2-215 TD Sensor Output
2-220 TD Sensor Initial Output
2-802 Drum Charge Roller Temperature
3-002 ID Sensor Initial Setting
3-103 ID Sensor Output
3-106 Initial V /V
LP LG
3-107 Current V /V
LP
3-111 Current V
RP
4-002 Exposure Lamp Voltage
4-202 ADS Initial Gain
4-203 ADS Actual Gain
5-402 User Code Counter
5-408 Number of Registered User Codes
7-001 Total Operation Time
7-002 Total Original Counter
7-003 Copy Charge Counter for RDS/CSS
FT5535/4527/4522
Description
LG
/V
RG
4-52
Data
0-32 (0.5 mm/step)
0-32 (0.5 mm/step)
0-32 (0.1%/step)
0-32 (0.1%/step)
0-150 (0.05 mm/step)
Mode No. Displayed Data
7-004 Initial Copy Counter Setting for
RDS/CSS
7-101 Total Copies by Paper Size
7-203 Drum Counter
7-204 Feed Unit Counter
7-205 DF Counter
7-206 Staple Counter
7-301 Total Copies by Magnification
7-401 SC Total Counter
7-402 SC Counter by Each Service Call
7-501 Total Jam Counter
7-502 Total Copy Paper Jam Counter
7-503 Total Original Jam Counter
7-504 Total Jams by Location
7-505 Total Original Jams by Location
7-801 Main ROM Version
7-803 PM Counter
FSM