Ricoh FT5535 Service Manual page 561

INSTALLATION
[C]
[D]
[H]
5. Remove the M4 x 8 round head screws (2 screws [A] for the
A204/A206/A207 copiers, 3 screws [A] and [B] for A208/A210/A211
copiers) from the left cover of the copier.
6. Mount the sorter stapler mounting frame [C] on the copier as shown
(4 screws M4 x 14 and 1 stepped screw [D]).
NOTE: When hooking the sorter stapler mounting frame on the left side
of the copier, make sure that the positioning hooks [E] on the
frame are properly inserted in the positioning holes [F] in the
copier.
7. Install the sorter stapler [G] on the frame (2 hinge pins at the rear) as
shown.
8. Tighten the M4 x 14 screw [H].
NOTE: This screw prevents the sorter stapler from falling down.
A207/A208/A211
[E]
[F]
[B]
[A]
[G]
A658I504.wmf
A658I506.wmf
1-58
A658I505.wmf
SM