CHAPTER 14: MASTER MAKING SECTION
16-2. Removing the Cutter Unit (Shuttle cutter : excluding A3/Ledger machines)
(1) Pull out the master making unit and switch off the machine power.
(2) Open the pressure plate, remove the following components.
-
Master roll
-
Master guide gate
-
Load pulse motor assembly
(3) Detach the cutter unit by unplugging the connectors (2 locations) and removing screw (M3x6: 1pc).
Cutter unit
Master stocker roller pulley
RISO Inc. Technical Communications
-
Master making cover front
-
Write pulse motor assembly
-
Master stocker roller pulley
< Cutter unit >
[ 14 - 30 ]
1461
1462
us.riso.com