CHAPTER 6: PRESS SECTION
2. Removing the Pressure Lever:Spring & Pressure Lever;Cam
(1) Remove the main belt. (Refer to chapter 3)
(2) Unhook the follower spring.
(3) Loosen cap screws (M6x10: 2pcs), and remove the pressure;spring and pressure;cam from the pressure
shaft.
<< Precaution in Reassembly >>
Make sure to adjust the mounting position of the pressure lever;spring. (Refer to end of this chapter)
RISO Inc. Technical Communications
Pressure lever;spring
Pressure shaft
Pressure lever;cam
[ 6 - 6 ]
0605
Follower spring
us.riso.com