Placing The Original; When Placing On The Glass Platen; When Placing In The Adf Unit (Option) - Riso SE 9480 User Manual

Placing the original

When placing on the Glass Platen

Open the Platen Cover and place the original face-
down. Align the center of the original with the mark on
the left-hand side of the glass. After placing the original,
slowly close the Platen Cover.
Magazines, books, scrap books, etc. should be placed
on the Glass Platen.

When placing in the ADF unit (Option)

Use the ADF unit if you are printing multiple originals in succession.
Place originals so that the one to be scanned first is on the top. Afterwards, align the ADF Original Guides with the
page width and set originals fully to the rear of the ADF.
Important!:
• If the original is smaller than the paper size that can be set in the ADF unit, place the original on the Glass Platen.
• Do not place multiple originals of differing sizes or otherwise unsuitable originals into the ADF unit.
It might cause paper jams and damage the machine.
p.18
• Once the originals are placed into the ADF unit, "Auto Process" setting is turned ON. Press the
it OFF. Default "Auto Process" setting for the ADF unit can be changed on the Admin. Screen.
p.167, p.168
Note:
• Up to 50 sheets of 80 g/m
• To print a proof copy after each master-making process, select [ADF Semi-Auto].
p.155
(21-lb bond) paper can be placed in the ADF unit.
2
Note:
• If the Gauge Cover is installed, place the original
underneath.
Gauge Cover
Basic Operations
Grasp here
and lift up the
gauge cover
Place the original
face-down
key to turn
Placing the original
41