Mater Making/Disposal Test Mode - Riso RZ3xx Series Technical Manual

3. Mater making / Disposal Test Mode (Unit Number 04/05)
No. Sensor switch check
0400 Master-positioning sensor
0401 Master detection sensor
0402 Master end sensor
0403 Cutter HP SW [Shuttle blade cutter]
0403 Cutter HP SW [Rotary cutter]
0404 Cutter Stop Position SW [Shuttle blade cutter]
0406 TPH pressure sensor
0407 Master-making-unit set sensor
0408 Master-making-unit lock sensor
0409 Master-making-unit safety SW
0410 Master-making-unit releasing button
0420 Master-disposal Jam Sensor
0421 Master-compression HP Sensor
0423 Master-disposal BOX safety SW
0425 Master-compression motor FG sensor
0426 Master-removal motor FG sensor
No. Motor, solenoid
0460 Thermal-pressure motor (CW)
0461 Thermal-pressure motor (CCW)
0462 Write pulse motor (CW)
0463 Write pulse motor (CCW)
0464 Load pulse motor (CW)
0466 Write pulse motor + Load pulse motor (CW)
0467 Master-making-unit release button LED
0470 Master removal motor (CW)
No. Unit check
0480 Cutter motor 1 cycle motion
0481 Thermal pressure motor action (TPH down)
0482 Thermal pressure motor action (TPH up)
0488 Master-making-unit Lock Solenoid ON/OFF action
0489 Storage fan solenoid ON/OFF action
0490 Master compression-plate home positioning
0493 Master compression-plate continuous movement
Cutter motor ON action (cut direction)
[For checking the motor as one part only.
0494
Disconnect the motor from the cutter unit
before activation.]
No. Data check
0521 TPH thermistor temperature data
0524 TPH power voltage
0527 Master usage start date [only on RZ3 modes]
RISO Inc. Technical Communications
Sensor light reflected (Master present) / No reflection ( No master)
Sensor light reflected (Master present) / No reflection ( No master)
Sensor light blocked (Master end seal detected)
SW pressed (Cutter at HP)
SW not pressed (Cutter at HP)
SW pressed (Cutter at end position)
Sensor light blocked (TPH down position)
Sensor light blocked (Master-making unit cover closed)
Sensor light blocked (Master-making unit locked in position)
SW pressed (Master-making unit upper cover is closed)
SW ON (Button is pressed )
Sensor light is not blocked (Master is detected - jammed)
Sensor light blocked (Master compression plate at HP)
SW ON (Master-Disposal Box is set in place)
Sensor light blocked (Encoder disc is detected)
Sensor light blocked (Encoder disc is detected)
Rotates in clock-wise (CW) direction
Rotates in counter-clock-wise (CCW) direction
Rotates in clock-wise (CW) direction (master feeding direction)
Rotates in counter-clock-wise (CCW) direction (master returning direction)
Rotates in clock-wise (CW) direction (master feeding direction)
Rotates both the Write & Load pulse motors in
clock-wise (CW) direction (master feed direction)
LED illuminates.
Rotates in clock-wise (CW) direction (master feed into master-disposal-box direction)
Performs one cutting motion.
Moves the TPH down.
Moves the TPH up
Press "Start" key to switch ON the Solenoid. Solenoid automatically
switches OFF 10 sec. later.
Press "Start" key to switch ON the Solenoid. Solenoid automatically
switches OFF 10 sec. later.
Moves master compression plate to the home position.
Repeats disposal compression action with interval of 3 seconds between the each.
Rotates the cutter motor in the cut direction (maximum 10 seconds)
Displays the temperature of the TPH thermistor in "degrees Celsius"
Displays the voltage applied to the TPH when the power to the TPH is switched ON.
Displays master use start date stored in Master TAG.
For example, 2004/2/28 will be displayed as 2004 and 0228 in intervals.
[ 17 - 9 ]
CHAPTER 17: TEST MODE
Detection status
Remarks
Details
Details
us.riso.com