Riso RZ3xx Series Technical Manual page 293

Error Type P98 [Hardware error]
P98-xxx
!!System Error!!
Description
Press Reset Key
If Recovery has Failed, Call Service
To reset
Turn power OFF and ON.
display
Error Point
Machine code number sent from SH3M2 PCB does not match with that from the Mechanical
055
control PCB.
063 Test mode setting is beyond the adjustable range.
064 Communication error between SH PCB and MCTL PCB.
065 Communication error between SH PCB and MCTL PCB (01) - on MCTL PCB side.
067 Communication error between SH PCB and MCTL PCB (03) - on MCTL PCB side.
068 Communication error between SH PCB and MCTL PCB (04) - on MCTL PCB side.
069 Communication error between SH PCB and MCTL PCB (05) - on MCTL PCB side.
070 Communication error between SH PCB and MCTL PCB (06) - on MCTL PCB side.
071 Communication error between SH PCB and MCTL PCB (07) - on MCTL PCB side.
072 Communication error between SH PCB and MCTL PCB (08) - on MCTL PCB side.
073 Communication error between SH PCB and MCTL PCB (09) - on MCTL PCB side.
074 Communication error between SH PCB and MCTL PCB (10) - on SH PCB side.
075 Communication error between SH PCB and MCTL PCB (11) - on SH PCB side.
076 Communication error between SH PCB and MCTL PCB (12) - on SH PCB side.
077 Communication error between SH PCB and MCTL PCB (13) - on SH PCB side.
078 Communication error between SH PCB and MCTL PCB (14) - on SH PCB side.
079 Communication error between SH PCB and MCTL PCB (15) - on SH PCB side.
080 Communication error between SH PCB and MCTL PCB (16) - on SH PCB side.
081 Communication error between SH PCB and MCTL PCB (17) - on SH PCB side.
082 Communication error between SH PCB and MCTL PCB (18) - on SH PCB side.
083 Communication error between SH PCB and MCTL PCB (19) - on SH PCB side.
084 Communication error between SH PCB and MCTL PCB (20) - on SH PCB side.
098 Machine serial number information on EEPROM does not match with that of FRAM.
119 Defective image PCB (memory check error on the image processing IC).
120 Timeout on the scanner serial communication.
129 Defective scanner gate array PCB (memory check error on the gate array).
245 Timeout error on master transfer during master-making (related to Write pulse motor).
246 Timeout error on master transfer during master-making (related to Load pulse motor).
RISO Inc. Technical Communications
Error Conditions
[ 16 - 15 ]
CHAPTER 16: PANEL MESSAGE
us.riso.com