Riso RZ3xx Series Technical Manual page 326

CHAPTER 17: TEST MODE
No. Data setting
Paper-ejection motor speed adjustment (Print speed No.1)
Description
0756
Paper-ejection motor speed adjustment (Print speed No.2)
Description
0757
Paper-ejection motor speed adjustment (Print speed No.3)
Description
0758
Paper-ejection motor speed adjustment (Print speed No.4)
Description
0759
Paper-ejection motor speed adjustment (Print speed No.5)
Description
0760
Paper-feed-clutch ON angle (Adjustment 1)
Description
0761
Paper-feed-clutch OFF angle (Adjustment 1)
Description
0762
Elevator upper-limit position selection (for user-mode paper finish type 1)
Description
0763
Paper-feed-clutch ON angle (Adjustment 2)
Description
0764
Paper-feed-clutch OFF angle (Adjustment 2)
Description
0765
RISO Inc. Technical Communications
Adjusts the speed of the suction belt in relation to the print drum speed.
0 : 1.5 times the drum speed.
1 : 1.7 times the drum speed. <default>
Setting 2 : 1.8 times the drum speed.
3 : 1.9 times the drum speed.
4: 2.0 times the drum speed.
Adjusts the speed of the suction belt in relation to the print drum speed.
0 : 1.3 times the drum speed.
1 : 1.5 times the drum speed. <default>
Setting 2 : 1.6 times the drum speed.
3 : 1.7 times the drum speed.
4: 1.8 times the drum speed.
Adjusts the speed of the suction belt in relation to the print drum speed.
0 : 1.1 times the drum speed.
1 : 1.3 times the drum speed. <default>
Setting 2 : 1.4 times the drum speed.
3 : 1.5 times the drum speed.
4: 1.6 times the drum speed.
Adjusts the speed of the suction belt in relation to the print drum speed.
0 : 1.0 times the drum speed.
1 : 1.1 times the drum speed. <default>
Setting 2 : 1.2 times the drum speed.
3 : 1.3 times the drum speed.
4: 1.4 times the drum speed.
Adjusts the speed of the suction belt in relation to the print drum speed.
0 : 1.0 times the drum speed.
1 : 1.1 times the drum speed.
Setting 2 : 1.2 times the drum speed. <default>
3 : 1.3 times the drum speed.
4: 1.4 times the drum speed.
Adjusts the drum angle timing for the paper-feed-clutch ON (For user-mode paper finish type 1)
Range :
Setting Unit :
Default :
Adjusts the drum angle timing for the paper-feed-clutch OFF (For user-mode paper finish type 1)
Range :
Setting Unit :
Default :
Selects the paper-feed-tray upper-limit position (For user-mode paper finish type 1)
0 : High (paper feed pressure is higher)
Setting 1 : Middle (paper feed pressure is middle) <default>
2 : Low (paper feed pressure is lower)
Adjusts the drum angle timing for the paper-feed-clutch ON (For user-mode paper finish type 2)
Range :
Setting Unit :
Default :
Adjusts the drum angle timing for the paper-feed-clutch OFF (For user-mode paper finish type 2)
Range :
Setting Unit :
Default :
Details
±20.0° from the programmed default position (+ delays ON timing)
5 (0.5°)
0 (0°)
±20.0° from the programmed default position (+ delays ON timing)
5 (0.5°)
0 (0°)
[for RZ3 series]
±20.0° from the programmed default position (+ delays ON timing)
5 (0.5°)
0 (0°)
±20.0° from the programmed default position (+ delays ON timing)
5 (0.5°)
0 (0°)
[ 17 - 14 ]
us.riso.com