Riso RZ3xx Series Technical Manual page 285

Error Type P05 [Print positioning pulse motor lock]
P05-xxx
!!System Error!!
Description
Press Reset Key
If Recovery has Failed, Call Service
To reset
Press Reset Key or turn the power OFF and ON.
display
Error Point
The vertical-centering sensor does not switch ON even when the vertical-positioning pulse
603 motor activated in the image-down direction for 5 seconds during vertical home positioning
movement.
The vertical-centering sensor does not switch OFF even when the vertical-positioning pulse
604 motor activated in the image-up direction for 5 seconds during vertical home positioning
movement.
Even though the vertical positioning motor stopped according to the vertical centering sensor
605 detection, the stopping position does not correspond with the programmed position. (GA
control error).
612 The print positioning key is pressed with vertical-print-position information undefined.
Error Type P08 [Communication error with CI]
P08-xxx
!!System Error!!
Description
Press Reset Key
If Recovery has Failed, Call Service
To reset
Turn the power OFF and ON.
display
Error Point
951 Incorrect RINC format file.
RISO Inc. Technical Communications
Error Conditions
Error Conditions
[ 16 - 7 ]
CHAPTER 16: PANEL MESSAGE
us.riso.com