Removing The Separator - Riso RZ3xx Series Technical Manual

8. Removing the Separator

(1) Switch off the machine power and remove the following components.
- Paper receiving tray
- Separation fan unit
(2) Pinch the power-band, slide it away from the separator, and pull the air-hose off the separator.
(3) Remove the cap screws (M3x10: 2pcs) and detach the separator from the shaft.
< Precaution in Reassembly >
The pinch knobs on the power-band should face towards you when installing it on the air-hose.
Separator
RISO Inc. Technical Communications
Power-band
[ 7 - 15 ]
CHAPTER 7: PAPER EJECTION SECTION
Air-hose
0738
us.riso.com