Removing The Serviceman Safety Sw - Riso RZ3xx Series Technical Manual

CHAPTER 3: MAIN DRIVE

5. Removing the Serviceman Safety SW

(1) Switch off the power, and remove the Rear cover and Scanner cover;rear.
(2) Unplug the connectors from the two switches, and detach reusable wire harness band from the machine
frame (on the paper receiving side only).
(3) Remove a screw each (M4x8: 1pc), and detach the two serviceman safety SW assemblies.
(4) Release the hook of the torsion spring, detach the E-ring and then remove the serviceman safety SW
together with its mounting bracket.
< Paper receiving side >
RISO Inc. Technical Communications
Reusable wire harness band
Switch connectors
0317
Torsion spring
E-ring
Serviceman safety SW
< Serviceman safety SW assembl y >
[ 3 - 12 ]
0318
< Paper feed side >
0319
0320
us.riso.com