Removing The Print Drum Pcb - Riso RZ3xx Series Technical Manual

10. Removing the Print Drum PCB

(1) Remove the print drum from the machine, and detach the drum cover from the drum by removing
screws (M3x6: 4pcs).
(2) Disconnect wire harness connectors (6 locations), remove screws (M3x8: 2pcs) and detach the print
drum PCB.
Print drum PCB
RISO Inc. Technical Communications
CHAPTER 8: PRINT DRUM SECTION
0846
[ 8 - 19 ]
Drum cover
0847
us.riso.com