Riso RZ3xx Series Technical Manual page 300

CHAPTER 16: PANEL MESSAGE
Error Type B31 [Network cable not connected]
B31-xxx
Description !! No Linked Printer Detected !!
Check Cable Connection and Power Supply for Linked Printer
To reset
Press Reset Key and connect the network cable.
display
Error Point
916 Network cable is not connected when the machine is powered ON.
Error Type B32 [NIC - Communication error]
B32-xxx
Description !! No Linked Printer Detected !!
Check Cable Connection and Power Supply for Linked Printer
To reset
Press Reset Key, and connect the linked printer and network cable.
display
Error Point
917 Communication error on the network.
Error detected by Network Interface Card (NIC) - NAK (negative acknowledgement was
920
received).
Error Type B33 [IP address set up error]
B33-xxx
Description No IP Address Assigned to This Printer
Contact Your Network Administrator
To reset
Press Reset Key, and enter the IP address..
display
Error Point
931 DHCP is ON, but DHCP server is not found.
Error Type B34 [Linked Printer: No Toner]
B34-xxx
Description
No Toner in Linked Printer
To reset
Press Reset Key, and check the toner amount in linked printer.
display
Error Point
919 No toner in the linked printer.
RISO Inc. Technical Communications
Error Conditions
Error Conditions
Error Conditions
Error Conditions
[ 16 - 22 ]
us.riso.com