Removing The Cutter Unit (Rotary Cutter : A3/Ledger Machines Only) - Riso RZ3xx Series Technical Manual

16-1. Removing the Cutter Unit (Rotary cutter : A3/Ledger machines only)

(1) Pull out the master making unit and switch off the machine power.
(2) Open the pressure plate, remove the following components.
- Master roll
- Write pulse motor assembly
- Cutter cover assembly
- Load roller
- Write roller pulley
(3) Detach the cutter unit by unplugging the connectors (2 locations) and removing two shoulder screws.
Master stocker roller pulley
1458
RISO Inc. Technical Communications
- Master making cover front
- Load pulse motor assembly
- Master loading guide
- Cutter guide assembly
- Master stocker roller pulley
Write roller pulley
< Cutter unit >
[ 14 - 29 ]
CHAPTER 14: MASTER MAKING SECTION
Connector Connector
1460
Cutter unit
1459
us.riso.com