4-2. Removing the Suction Upper Assembly (RZ2 series)
(1) Switch off the power, and remove the following components.
-
Paper receiving tray
-
Paper ejection cover
-
Suction unit
(2) Remove the timing belt
(3) Remove screw (M4x8: 1pc each), and remove the fixed-wing;front and fixed-wing;rear.
(4) Remove screws (M4x8: 4pcs ), unplug the connector and separate the suction upper assembly from the
suction unit.
Fixed-wing;front
< Suction Upper Assembly >
RISO Inc. Technical Communications
< Suction Unit >
Fixed-wing;rear
Slot for the wing to fit.
CHAPTER 7: PAPER EJECTION SECTION
0716
Timing belt
0717
Connector
0719
[ 7 - 9 ]
0718
Portion of the fixed-wing to fit
into the slot on the suction
upper assembly.
us.riso.com