Riso RZ3xx Series Technical Manual page 331

No. Data setting
Vertical print position HP adjustment.
Description
0970
Printing pressure HP adjustment [RZ3 series only]
Description
0972
RISO Inc. Technical Communications
Sets the HP (center) position of the vertical print position.
Range :
Setting
Unit :
Default :
Offsets the HP (center) position of the printing pressure.
Range :
Setting
Unit :
Default :
Details
±5mm from the sensor detected position
(+ brings the image up)
-50 to +50 (example: 15 = 1.5mm)
1 (0.1mm)
0 (0mm)
±5000 pulses from the sensor detected position
(+ brings the pressure up)
-50 to +50 (example: 15 = 150 pulses)
1 (10 pulses)
0 (0 pulse)
[ 17 - 19 ]
CHAPTER 17: TEST MODE
us.riso.com