Removing The Print Drum, Master Making U Release Button, Lock Solenoid, And Safety Switch - Riso RZ3xx Series Technical Manual

CHAPTER 14: MASTER MAKING SECTION

2. Removing the Print Drum, Master Making U Release Button, Lock Solenoid, and Safety Switch

(1) Detach the front cover.
(2) Pull out the master making unit and switch off the machine power.
(3) Detach the safety SW cover by removing a screw (M4x8: 1pc).
(4) Unplug connectors (3 locations), remove screws (M4x8: 3pcs) and detach the master making U lock
unit.
Removing the print drum release button and master making U release button
(5) Undo two hooks on each button from the master making U lock unit and remove the buttons.
Removing the master making U lock solenoid
(5) Remove screws (M3x6: 2pcs) and detach the master making U lock solenoid.
Master making U release button
RISO Inc. Technical Communications
Master making U lock solenoid
[ 14 - 10 ]
Master making U lock unit
1415
1416
Print drum release button
us.riso.com