D01 Print Drum Not Set; D02 Incorrect Print Drum; D03 Ink Cartridge Not Set - Riso RZ3xx Series Technical Manual

CHAPTER 16: PANEL MESSAGE
Set check errors
Error Type D01 [Print drum not set]
D01-xxx
Description
Set Print Cylinder (Drum) in Place
To reset
Set the print drum in the machine.
display
Error Point
Print drum is not set in the machine (drum connection signal, drum safety switch, and drum-
526
lock sensor is OFF.
527 Print drum connection signal is OFF when the print drum was inserted in the machine.
528 Print drum safety switch is OFF when the print drum was inserted in the machine.
Print drum lock sensor is OFF when the print drum was inserted in the machine (time-out: 5
529
seconds).
Print drum connection signal does not go OFF within 5 seconds after the print drum safety
530
switch went OFF when the print drum was pulled out.
Error Type D02 [Incorrect print drum]
D02-xxx
Description Wrong-Type Print Cylinder Installed
Replace with Correct Type
To reset
Set correct print drum in the machine.
display
Error Point
532 Incorrect print drum is used.
Error Type D03 [Ink cartridge not set]
D03-xxx
Description
Install Ink Cartridge
To reset
Install ink cartridge in the print drum.
display
Error Point
533 Bottle set switch is OFF.
RISO Inc. Technical Communications
Error Conditions
Error Conditions
Error Conditions
[ 16 - 24 ]
us.riso.com