CHAPTER 7: PAPER EJECTION SECTION
3. Paper-Ejection-Wing Mechanism (RZ 3 Series)
The paper-ejection-wing position can be set to a desired position manually by rotating a dial knob in following
three positions.
The three positions of the paper-ejection-wings.
(1) Both the wing-M and belt roller are at high position, and wing-S is lowered. This wing position is for
papers of B4 size or larger.
Wing-M
(2) Both the wing-M and belt roller is at low position, and wing-S is raised. This wing position is for papers of
less than B4 size.
S Wing
(3) The wing-M, belt roller and wing-S are all at low position. This wing position is for all paper sizes of thick
card papers.
RISO Inc. Technical Communications
Belt roller
[ 7 - 4 ]
0705
0706
0707
us.riso.com