Riso RZ3xx Series Technical Manual page 319

2. Process /Scanning Test Mode
No. Sensor switch check
0200 Carriage HP sensor
0201 Flatbed Original Det. Sensor
0209 Compression plate open/shut sensor
No. Motor, solenoid
0260 Scanner lamp
No. Unit check
Carriage Home Action
0281
Brings the carriage to the Home Position. (RZ2 series = Scanner carriage,
Scanner Cycle Continuous Action
RZ3 series : Scanner one cycle action with auto-base-control (ABC) action.
0284
RZ2 series : Scanner one cycle action without the ABC action.
Repeats the one cycle action until the STOP key is pressed.
Presses "Stop" key to stop the motion and returns to Home position.
Scanner Lamp Replace Positioning [Available only on RZ3 series]
0287
Moves the scanner to lamp replacing position.
Scanner HP Positioning & Image sensor adjustment Positioning [Available only on RZ2 series]
1. Scanner HP positioning.
0288
2. Image sensor adjustment positioning
Repeats above two positioning by each pressing of START key.
Scanner "Shipping" Positioning
0289
Moves Scanner to the machine shipping position (Same for scanner unit shipping position).
No. Data setting
Line-Copy Slice Level Adjustment [For RZ2 series]
Description
0340
Setting
Line-Copy Slice Level Adjustment [For RZ3 series]
Description
0340
Setting
Auto Base Control (ABC) Slice Level Adjustment [Available only on RZ3 series]
Description
0341
Setting
Halftone Curve Selection (Photo)
Description
0350
Setting
Halftone Curve Selection (Dot Photo) [Available only on RZ3 series]
Description
0351
Setting
Halftone Curve Selection (Duo)
Description
0352
Setting
Halftone Curve Selection (Dot Duo) [Available only on RZ3 series]
Description
0353
Setting
RISO Inc. Technical Communications
Carriage at Home position.
Detecting (original present)
Original Det. Cover closed.
Switches ON/OFF scanner lamp [Available only on RZ3 series]
RZ3 series = Mirror carriage)
Sets the slice level for line mode. Larger values for lighter print.
Range: -8 to 8
Unit : 1
Default : 0
Sets the slice level for line mode. Larger values for lighter print.
Range : -16 to 16
Unit : 1
Default : 0
Sets the slice level for ABC. Larger values for lighter print.
Range : -16 to 16
Unit : 1
Default : 0
Selects the matrix forming the halftone-curve base for photo mode.
Range: 0 to 8
Unit : 1
Default : 4
Selects the matrix forming the halftone-curve base for dot mode.
Range : 0 to 8
Unit : 1
Default : 4
Selects the matrix forming the halftone-curve base for DotDuo mode.
Range : 0 to 8
Unit : 1
Default : 4
Selects the matrix forming the halftone-curve base for DotDuo mode.
Range : 0 to 8
Unit : 1
Default : 4
[ 17 - 7 ]
CHAPTER 17: TEST MODE
Detection status
Remarks
Details
Details
us.riso.com