CHAPTER 7: PAPER EJECTION SECTION
4-1. Removing the Suction Upper Assembly (RZ3 series)
(1) Switch off the machine power and remove following components.
-
Paper receiving tray
-
Paper ejection cover
-
Suction unit
(2) Remove the timing belt
(3) Remove screws (M4x8: 4pcs), unplug the connector and separate the suction upper assembly from the
suction unit.
RISO Inc. Technical Communications
< Suction Unit >
< Suction Upper Assembly >
[ 7 - 8 ]
Suction upper assembly
0714
Timing belt
Connector
0715
us.riso.com