Riso RZ3xx Series Technical Manual page 332

CHAPTER 17: TEST MODE
6. Protected Area Test Modes
Test Mode No. 9874 must be activated to access into the Protected Area Test Modes.
CAUTION: Many hidden test modes used by the Factory are included in the Protected Area.
Activate only those test modes listed below.
No. Unit check
Paper size VR adjustment
1102
Sets a VR value at paper guide fence width of 105 mm (A6 paper width).
Paper size VR adjustment
1103
Sets a VR value at paper guide fence width of 297 mm (A3 paper width).
No. Data clear
REv Data Initialize
1193
Initializes the REv data memory area
No. Data setting
REv Event Selection
Description
1200
Drum Code Entry
Description
1210
Drum Serial Code Entry 1
Description
1211
Drum Serial Code Entry 2
Description
1212
RISO Inc. Technical Communications
Selects the REv events to be downloaded.
Range :
Setting
Default :
Sets the print drum information on the EEPROM of the Drum PCB.
Range :
Setting
Default :
Inputs the first 4 -digits of the print drum serial number
Range :
Setting Unit :
Default :
Inputs the last 4 -digits of the print drum serial number
Range :
Setting Unit :
Default :
Details
Details
Details
0 : All events & All errors
1 : All the errors only
2 : All errors, and Master-making and printing start points
3 : Manual events only
2 : All errors, and Master-making and printing start points
0 to 255
[RZ2 series]
18: B4 19: A4/Letter
[RZ3 series]
33: A3 35: A4/Letter
0
0 to 9999
1
0
0 to 9999
1
0
[ 17 - 20 ]
22: Legal/Foolscap
37: Ledger
us.riso.com