3. Removing the FB Original Detection Sensor
(1) Switch off the machine power and remove the stage glass.
(2) Remove screws (M3x6: 3pcs), lift the sensor cover with the FB original detection sensor attached.
Disconnect the sensor connector and detach the FB original detection sensor together with the sensor
cover.
(3) Disengage the claws (3 locations) on the FB original detection sensor from the sensor cover to detach
the sensor.
FB original detection sensor
Sensor claws
RISO Inc. Technical Communications
CHAPTER 11: FB ORIGINAL SCANNING SECTION (600 dpi)
Sensor cover
< FB Original Detection Sensor >
1110
Sensor cover
Connector
Sensor claw
1112
[ 11 - 9 ]
FB original detection sensor
1111
us.riso.com