Removing The Ink Scraper Plate Assembly F & R - Riso RZ3xx Series Technical Manual

CHAPTER 8: PRINT DRUM SECTION
5. Removing the Ink Scraper Plate Assembly F & R
(1) Make a confidential master on the print drum and pull out the drum from the machine.
(2) Remove the following components.
- Screen assembly
- Master clamp base assembly
- Drum body
(3) Remove screws (M3x8: 1pc each), and remove the scraper plate assembly F & R.
< Ink scraper assembly F >
RISO Inc. Technical Communications
Ink scraper assembly R
0834
[ 8 - 14 ]
0831
< Ink scraper assembly R >
Ink scraper assembly F
0832
0833
us.riso.com