Riso RZ3xx Series Technical Manual page 317

No. Data setting
Maintenance-Drum Meter Entry
Description
0145
Print Speed After Short Interval
Description
0151
Minimum Print Quantity Control
Description
0154
Counter Action Control
Description
0155
Machine Clock Setting (YEAR)
Description
0171
Machine Clock Setting (MONTH & DATE)
Description
0172
Machine Clock Setting (HOUR & MINUTE)
Description
0173
Chinese Paper No.16 (Width data setting)
Description
0174
Chinese Paper No.8 (Width data setting)
Description
0175
Chinese Paper No.8 (Length data setting)
Description
0176
Paper Size Detection Selection (Normal or Chinese)
Description
0177
RISO Inc. Technical Communications
Sets the number of print-drum prints at which the maintenance-call message is displayed (set for
each print drum).
Range :
Setting Unit :
Default :
Gradual print speed acceleration after short intervals between printing job.
0 : Disabled (default)
Setting
1: Enabled
Enables/Disables making input changes by the Users Mode.
0 : Disabled
Setting
1: Enabled ( default)
Enables/Disables copy counter & master counter (solenoid counter, software counter).
This setting returns to default once the power is switched OFF.
0 : Disabled
Setting
1: Enabled ( default)
[Available only on RZ3 series]
Sets "year" in clock.
Range :
Unit :
Default:
Setting
[Available only on RZ3 series]
Sets "month / date" in clock.
Range :
Unit :
Setting
Default :
[Available only on RZ3 series]
Sets "hour / second" in clock.
Range :
Unit :
Setting
Default :
Sets paper width data.
Range :
Setting Unit :
Default :
Sets paper width data.
Range :
Setting Unit :
Default :
Sets paper length data.
Range :
Setting Unit :
Default :
Normal paper size detection or Chinese paper size detection.
Range :
Setting Unit :
Default :
Details
0 to 9,999,000
1 ( x 1000)
0 : No maintenance call display
2000 to 2199 (Year 2000 to 2199)
1 = 1 year
2000 (Year 200)
Test Mode No. 0101 must be activated after inputting test
modes No. 0171 through No. 0173 to activate the new setting.
Left 2 digits= MONTH: 1 to 12 (January to December)
Right 2 digits = DAY: 1 to 31 (Days 1 to 31)
1 = 1 month, 1 = 1 day
0101 (January 1)
Test Mode No. 0101 must be activated after inputting test
modes No. 0171 through No. 0173 to activate the new setting.
Left 2 digits = HOUR: 0 to 23 (0 to 23 hours)
Right 2 digits = MINUTE: 0 to 59 (0 to 59 minutes)
1 = 1 hour, 1 = 1 minute
0000
Test Mode No. 0101 must be activated after inputting test
modes No. 0171 through No. 0173 to activate the new setting.
191 to 199 (191mm to 199mm)
1 = 1mm
195 (195mm)
266 to 276 (266mm to 276mm)
1 = 1mm
271 (271mm)
385 to 395 (385mm to 395mm)
1 = 1mm
390 (390mm)
0 : Normal paper size detection (default)
1 : Chinese paper size detection.
0 : Normal paper size detection.
[ 17 - 5 ]
CHAPTER 17: TEST MODE
us.riso.com