Riso RZ3xx Series Technical Manual page 296

CHAPTER 16: PANEL MESSAGE
Error Type A05 [Master present in the master disposal area]
A05-xxx
Description Master Jammed in Disposal Unit
Pull Out Master Disposal Box and Remove Jammed Master
To reset Pull out master disposal box and place it back after removing the jammed master in the
display master disposal area, or turn OFF the power and power back ON.
Error Point
304 Master disposal jam sensor was ON at the completion of the master disposal.
312 Master disposal jam sensor was ON at the start of the master making.
315 Master disposal jam sensor was ON after the completion of the recovery movement.
Error Type A06 [Check paper feed tray]
A06-xxx
Description Safety SW on Standard Feed Tray is Activated
Reset paper on Standard Feed Tray
To reset Change the condition of the paper-feed-tray upper/lower safety switches to ON condition, or
display turn OFF the power and power back ON.
Error Point
403 Either the upper or lower safety switch of the paper-feed-tray is OFF.
RISO Inc. Technical Communications
Error Conditions
Error Conditions
[ 16 - 18 ]
us.riso.com