Riso RZ3xx Series Technical Manual page 334

CHAPTER 17: TEST MODE
No. Data setting
Scanner Adjustment (5)
Description
1224
RLP Mode Enable Control
Description
1229
TPH master-making horizontal position adjustment
Description
1233
TPH resistance input
Description
1234
RISO Inc. Technical Communications
Gain [for RZ3 series]
Input the number imprinted on the sticker on the Scanner Unit.
Range :
Unit :
Default :
Setting
[for RZ3 series]
Activates or deactivates the RLP feature.
0 : Disabled (default)
Setting
1: Enabled
Sets the TPH master-making position to the center
Range :
Setting
Unit :
Default :
Sets TPH resistance.
Range :
Setting
Unit :
Default :
Details
0 to 255
1
128
Note: The input number changes after the gain adjustment is made.
Use the newly displayed number from the next gain adjustment for
that one particular scanner unit.
-23 to +23 (-2.3 to +2.3mm) [RZ3 series]
-30 to +30 (-3.0 to +3.0mm) [RZ2 series]
(+ brings the master-making image to the left)
1 (0.1 mm)
0 (0 mm)
1200 ohm to 2300 ohm [RZ3 series]
1200 ohm to 1900 ohm [RZ2 series]
1 (1 ohm)
1200 (1200 ohm)
[ 17 - 22 ]
us.riso.com