CHAPTER 7: PAPER EJECTION SECTION
5. Removing the Paper Ejection Sensor
(1) Switch off the machine power and remove the following components.
-
Paper receiving tray
-
Paper ejection cover
-
Suction unit
(2) Remove the suction upper assembly.
(3) Remove a screw (M3x6: 1pc), disconnect the connector, and detach the paper ejection sensor together
with the sensor bracket.
Paper ejection sensor bracket
RISO Inc. Technical Communications
< Suction upper assembly >
0721
[ 7 - 10 ]
0720
Paper ejection sensor
0722
us.riso.com