Outline Of Master-Removal, Master-Making And Master Loading Operations - Riso RZ3xx Series Technical Manual

4. Outline of Master-removal, Master-making, and Master-loading Operations
Clamp plate
Vertical transport rollers
Master disposal box
Compression plate
RISO Inc. Technical Communications
Master -release bar
Master material
Thermal print head
Cutter
0203
CHAPTER 2: MACHINE SUMMARY
Master-removal operation
(1) The clamp plate holding the leading edge of the master
opens, and the master-release bar rises to lift the
master out from under the clamp plate
(2) The vertical transport rollers and print drum rotate,
thereby separating the master from the print drum and
sending it to the master disposal box.
(3) The motion of the compression plate starts, pressing
the master into the master disposal box.
Master-making operation
(1) The image sensor scans the original, and the thermal
print head transfers the image onto a master.
Master-loading operation
(1) The leading edge of the master is sent to a the clamp
plate on the print drum, and the leading edge is
clamped.
(2) The print drum rotates to wind the master around it.
(3) The cutter cuts the master.
[ 2 - 5 ]
us.riso.com