CHAPTER 14: MASTER MAKING SECTION
3. Removing the Print Thermal Head Assembly
(1) Pull out the master making unit and switch off the machine power.
(2) Disconnect the ground wire by removing a screw (M3x6: 1pc).
(3) Open the master making unit upper cover.
(4) Detach the master making unit bottom cover by removing screws (M3x6: 2pcs).
(5) Detach the connector cover by removing one screw (M3x6: 1pc).
- Continues on next page -
Master making unit bottom cover
RISO Inc. Technical Communications
Master making unit upper cover
[ 14 - 12 ]
1419
Ground wire
1421
Connector cover
1420
1422
us.riso.com