Disassembly; Removing The Master Making U Lock Sensor - Riso RZ3xx Series Technical Manual

Disassembly

1. Removing the Master Making U Lock Sensor

(1) Pull out the master making unit and switch off the machine power.
(2) Detach the safety SW cover by removing a screw (M4x8: 1pc).
(3) Unplug the connector, remove a screw (M3x6: 1pc) and detach the master making U lock sensor.
RISO Inc. Technical Communications
Master making U lock sensor
[ 14 - 9 ]
CHAPTER 14: MASTER MAKING SECTION
Safety SW cover
1413
Connector
1414
us.riso.com