Disassembly; Removing The Guide Roller - Riso RZ3xx Series Technical Manual

CHAPTER 5: SECOND PAPER FEED SECTION

Disassembly

1. Removing the Guide Roller

(1) Pull out the print drum and switch off the machine power.
(2) From the opening on the machine for the print drum, remove the snap ring. Then remove the bearing
metal from the guide roller adjusting plate to free the guide roller out of the machine.
RISO Inc. Technical Communications
Guide roller
[ 5 - 6 ]
0506
Guide roller adjusting plate
Snap ring
Bearing metal
0507
us.riso.com