Removing The Fb/Af Hp Sensor - Riso RZ3xx Series Technical Manual

CHAPTER 11: FB ORIGINAL SCANNING SECTION (600 dpi)

6. Removing the FB/AF HP Sensor

(1) Switch off the machine power and remove the scanner cover;paper feed.
(2) Detach the FB/AF HP sensor, together with the sensor bracket, from the scanner unit by removing screw
(M3x6: 1pc), and disconnect the connector to the sensor.
(3) Disengage the claws on the FB/AF HP sensor from the sensor bracket to remove the sensor.
RISO Inc. Technical Communications
Sensor bracket
[ 11 - 12 ]
Sensor bracket
Connector
1119
1120
FB/AF HP sensor
us.riso.com