Removing The Master Compression Plate - Riso RZ3xx Series Technical Manual

CHAPTER 10: MASTER REMOVAL SECTION

9. Removing the Master Compression Plate

(1) Switch off the machine power and detach the master removal unit.
(2) Detach the compression gear cover and spur gear to lower the master compression plate.
(3) Remove an E-ring and metal bushing from the rear of the unit.
(4) Remove a screw (M4x8: 1pc) from the front of the unit and detach the compression gear.
(5) Remove an E-ring and metal bushing from the front of the unit and detach the master compression plate.
< REAR >
< Master Compression Plate >
RISO Inc. Technical Communications
Master compression plate
Compression gear
1042
1045
[ 10 - 16 ]
1041
< FRONT >
1043
1044
us.riso.com