Master Cutting Mechanism (Shuttle Cutter : Excluding A3 Machine) - Riso RZ3xx Series Technical Manual

3-2. Master Cutting Mechanism (Shuttle cutter : excluding A3 machine)

The master is cut by the round disc shuttle cutter blade sliding from the home position at one end to the cutter
stop position on the other end of the cutter unit. Once the disc blade cuts the master material, it returns back
to the home position to end the cutting operation.
The position of the disc blade is checked by the cutter HP SW and cutter stop position SW. The blade is at
the home position when the cutter stop position SW is OFF and cutter HP SW is ON.
Cutter stop position SW
Disc blades
RISO Inc. Technical Communications
CHAPTER 14: MASTER MAKING SECTION
Shuttle
[ 14 - 5 ]
1406
1407
Cutter motor
Cutter HP SW
1408
us.riso.com