Disassembly; Removing The Original Feed Roller Assembly - Riso RZ3xx Series Technical Manual

CHAPTER 13: AF SCANNING SECTION

Disassembly

1. Removing the Original Feed Roller Assembly

(1) Switch off the machine power and open the AF unit.
(2) Remove screws (M3x10: 2pcs) and remove the AF cover.
(3) Close the AF unit.
(4) Remove the snap ring from the both ends of the original feed roller assembly and remove the metal
bushings. Detach the original feed roller assembly by lifting the orginal stopper gate out of the way.
Snap ring Metal bushing
RISO Inc. Technical Communications
AF cover
Original stopper gate
1304
< Original Feed Roller Assembly >
[ 13 - 6 ]
Original feed roller assembly
Metal bushing Snap ring
1305
1306
us.riso.com