Removing The Pressure Hp Sensor (Rz 3 Series) - Riso RZ3xx Series Technical Manual

3. Removing the Pressure HP Sensor (RZ 3 series)

(1) Switch off the machine power, remove the rear cover, and swing open the PCB bracket of the power
supply PCB and mechanical control PCB.
(2) Remove the pressure HP sensor from the machine together with the sensor bracket by disconnecting the
sensor connector and a screw (M3x6: 1pc).
Pressure HP sensor
Screw
RISO Inc. Technical Communications
[ 6 - 7 ]
CHAPTER 6: PRESS SECTION
0606
us.riso.com