Riso RZ3xx Series Technical Manual page 265

(5) Pull out the flat cable guiding box in the direction indicated by an arrow mark on the photograph below,
just enough to unhook from the master making unit, and disengage it from the maser making unit.
(6) Push both the flat cable guiding box and flat cable support plate back into the machine.
(7) From the top of the master making unit, remove the four shoulder screws and detach the unit from the
machine by lifting it.
- Precaution in assembly continues on next page -
Master making unit
Flat cable guiding box
< Master making unit >
RISO Inc. Technical Communications
Hooks on the flat cable
support plate
1469
Shoulder screws
1471
[ 14 - 33 ]
CHAPTER 14: MASTER MAKING SECTION
< Rear >
Shoulder screws
Shoulder screws
Shoulder screws
< Front >
Flat cable guiding box
1470
1472
1473
us.riso.com