Proof And Print (Only When The Adf Unit Is Installed) [Adf Semi-Auto] - Riso SE 9480 User Manual

Proof and Print
(only when the ADF unit is installed)
[ADF Semi-Auto]
Selecting "Auto Process" with the optional ADF unit installed automatically performs the complete printing job, but
you cannot make proof copies, or any necessary adjustments of each master. To pause for check after printing a
proof copy of each master, select "ADF Semi-Auto".
Important!:
• Turn "Auto Process" OFF when using "ADF Semi-Auto".
p.66
Note:
• The default "ADF Semi-Auto" can be set on the Admin. Screen.
p.168
1
Touch [ADF Semi-Auto] on the Func-
tions Screen.
Ready to Make Master
Basic Selections
Top Margin
Binding Margin
Max. Scan
Reservation
"ADF Semi-Auto" is selected.
Note:
• When "ADF Semi-Auto" is not displayed (or dis-
played in gray), turn off the "Auto Process" key
on the Control Panel.
2
Place original(s) in the ADF unit.
The ADF unit detects the document, and automat-
ically opens the Master Making Basic Screen.
To place the original,
Functions Admin.
ADF Semi-Auto ADF Semi-Auto
Preview
Overlay
Storage Memory
2/4
P .
p.41.

Proof and Print (only when the ADF unit is installed) [ADF Semi-Auto]

3
Enter the number of copies using the
Print Quantity Keys.
The number is displayed on the Print Quantity Dis-
play.
Note:
• To change the number, press the
then re-enter the correct number.
4
Press the
After a master is made, a proof copy is printed and
the job stops.
5
Check the proof copy.
Make adjustments if needed.
6
Press the
The machine prints specified number of copies.
Master for the next original is made, its proof copy
is printed, then the machine stops again.
Repeat steps 5 and 6.
Advanced Features
key,
key.
RESET
PROOF
START
STOP
key.
155