Removing The Ink Volume Detection Sensor (Receive) Ass'y - Riso V8000 Series Technical Manual

CHAPTER 8. PRINT DRUM SECTION
2.

Removing the Ink Volume Detection Sensor (Receive) Ass'y

(1) Remove the print drum cover. (Four M4 x 8 screws)
(2) Disconnect the four connectors and two snap bands, remove the two mounting screws (M4 x 8), and
remove the ink volume detection sensor (receive) ass'y.
* When the ink volume detection sensor (receive) ass'y is closed, do not apply excessive force in
opening it. Open it by releasing the hook.
Print drum cover
Ink volume detection sensor (receive) ass'y
Connector
Connector (2 places)
Hook
P08008
Snap bands Connector
[8 - 8]
Screws to remove
P08009
Hook
P08010