Disassembly; Removing The Main Cover Ass'y - Riso V8000 Series Technical Manual

Disassembly

1.

Removing the Main Cover Ass'y

(1) Remove the reuse band on the position T sensor wire harness and disconnect the position T sensor
connector.
(2) Detach the wire harness from the wire saddle.
(3) Remove the eight mounting screws (M4 x 8), then remove the main cover ass'y.
Position T sensor
CHAPTER 3. MAIN DRIVE SECTION
Main cover ass'y
[3 - 7]
P0309