Table of Contents
Advertisement
Using the Job Separator
[Job Separation]
You can use the [Job Separation] function after
installing the optional Job Separator.
• When you print with [Auto Process] turned on
after placing originals on the auto document
feeder, turn on [Job Separation] to insert a piece
of tape each time the original changes.
• When you also use [Program]
piece of tape is inserted in each separation of the
printing.
• When used with [Auto Page Renewal]
piece of tape is inserted before master making
again.
For more information, see the user's guide for the
Job Separator.
BThis function works only when [Program]
(A
108) or [Auto Process]
BYou cannot use this function with the fol-
lowing function.
C [Slip sheet sorting]
BYou can change the default setting in [Job
Separation]
(A
138) under [Admin.].
1
Touch [Job Separation] in the
[Functions] tab screen.
(A
108) together, a
(A
101), a
(A
28) is [ON].
(A
114)
Using the Registered Settings
[Job Memory]
You can register a set of required settings.
This function is useful as the same settings can be
retrieved for use.
Registering [Job Memory]
1
Set the required functions.
(A
52 "Functions for Master Making")
(A
96 "Functions for Printing")
(A
108 "Useful Functions")
2
Touch [Job Memory] in the [Func-
tions] tab screen.
The [Job Memory] screen is displayed.
BYou can also display the [Job Mem-
ory] screen by pressing the [U] key.
3
Touch a button for which nothing
has been registered.
BYou cannot touch a grayed button
as the settings have already been
registered.
4
Check the settings.
Touch [G] to check all items to the end of the
list.
115
Chapter 5 Useful Functions
5
Advertisement
Table of Contents
Troubleshooting
