Removing The Control Panel Lcd Pcb - Canon iR4570 Series Service Manual

Hide thumbs Also See for iR4570 Series:
Table of Contents

Advertisement

Chapter 10
 
2.After mounting the control panel frame, be sure to
route the inverter harness through the edge saddle [1].
F-10-59
10.5.4.8 Removing the Control
Panel LCD PCB
/ iR3530
1)Disconnect the connector [1] from the control panel
inverter PCB.
2)Remove the 3 self-tapping screws [2], and detach
the control panel LCD PCB [3].
F-10-60
10.5.5 DC Controller PCB
10.5.5.1 Removing the Rear
Cover
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Remove the 13 screws [1] and then the other screw
[2]; then, detach the rear cover [3].
10-30
If the left cover (lower) has already been detached, the
screw [3] should also have been removed.
0009-2849
10.5.5.2 Removing the DC
Controller PCB
iR2270 / iR2870 / iR3570 / iR4570 / iR3530
1) Disconnect the connector [1].
0007-7370
[3]
[1]
[1]
[1]
[1]
[1]
[1]
[1]
[2]
F-10-61
F-10-62
[1]
[1]
[1]
[1]
[1]
[1]
0007-6398

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir 3570 seriesIr 2870 seriesIr 2270 series

Table of Contents