Servicing Electrical Components; Servicing Mechanical Components - Xerox Phaser 6280 Service Manual

Color laser printer

Hide thumbs Also See for Phaser 6280:

Table of Contents

Servicing Electrical Components

Servicing Fuser Components

Before starting any service procedure, switch the printer power Off and

unplug the power cord from the wall outlet. If you must service the printer with

power applied, be aware of the potential for electrical shock.

Do not touch any electrical component unless you are instructed to do so

by a service procedure.

When servicing mechanical components within the printer, manually rotate

the Drive Assemblies, Rollers, and Gears.

Do not try to manually rotate or manually stop the drive assemblies while

any printer motor is running.

This printer uses heat to fuse the toner image to paper. The Fuser is

VERY HOT. Turn the printer power Off and wait at least 5 minutes for the

Fuser to cool before attempting to service the Fuser or adjacent

Phaser 6280 Color Laser Printer Service Manual