Servicing Electrical Components; Servicing Mechanical Components - Xerox Phaser 6130 Service Manual

Servicing Electrical Components

Servicing Mechanical Components

Servicing Fuser Components
viii
Before starting any service procedure, switch the printer power Off and
unplug the power cord from the wall outlet. If you must service the printer with
power applied, be aware of the potential for electrical shock.
Warning
Do not touch any electrical component unless you are instructed to do so
by a service procedure.
s6180-256
When servicing mechanical components within the printer, manually rotate
the Drive Assemblies, Rollers, and Gears.
Warning
Do not try to manually rotate or manually stop the drive assemblies while
any printer motor is running.
s6180-257
Warning
This printer uses heat to fuse the toner image to paper. The Fuser is
VERY HOT. Turn the printer power Off and wait at least 5 minutes for the
Fuser to cool before you attempt to service the Fuser or adjacent
components.
Phaser 6130 Color Laser Printer Service Manual