Replacing The Tray 2 Feed Roller - Konica Minolta bizhub C250 Service Manual

3. Periodical check
[5]
[7]
[8]
[13]
[12]
3.5.6

Replacing the Tray 2 Feed Roller

22
5. Remove two Screws [5] and the Tray
2 Separation Roller installation plate
Assy [6].
[6]
4038F2C013DA
6. Remove two C-rings [7] and the
Shaft [8], and remove the Separation
[9]
Roller fixing plate Assy [9].
NOTE
• Use care not to miss the Spring
[10]
[10].
[7]
4038F2C508DA
7. Remove the C-ring [11] and Guide
[12], and remove the Tray 2 Separa-
tion Roller Assy [13].
[11]
4038F2C559DA
1. Remove the Tray 2 Separation Roller
installation plate Assy.
See the procedures 1 to 5 in "Tray 2 Sep-
aration Roller."
See P.21
2. Remove the Tray 2 Right Rear
Cover.
See P.90
[1]
3. Disconnect the Connector [1].
4038F2C014DA
Field Service Ver. 3.0 Aug. 2006