Display Setting - Konica Minolta bizhub C250 Service Manual

Field Service Ver. 3.0 Aug. 2006
(3) Bin Setting (bizhub C252 only)
2
• It will be displayed only when the optional mailbin kit MT-501 is mounted.
Functions • Assign the first exit tray (tray 1) of the finisher to the mailbin 5, and the second exit
tray (tray 2) to the mailbin 6.
• The second exit tray (tray 2) can be assigned when the optional exit tray OT-601 is
mounted.
Use • Use when assigning the first and the second exit tray of the finisher to the mailbins.
Setting/ • The default setting is Disable.
Procedure
G. AE Level Adjustment
• It will be displayed only when the following setting is set to "Level 2".
[Administrator Setting] → [Security Setting] → [Administrator Security Level]
• It will not be displayed when the following setting shows that Authentication Device or the
Vendor is mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(It will be displayed when the Key Counter is mounted.)
Functions • To set the default setting for AE (Auto Exposure) The larger the value becomes the
more emphasized the background will be.
Use To make the background level foggier: Increase the setting value
To make the background level less foggy: Decrease the setting value
Setting/ • The default setting is 2.
Procedure
8.5.2

Display Setting

A. Sub Screen Display ON/OFF
Functions • To set the Sub Screen Display on the control panel.
Use • To change the Sub Screen Display.
Setting Value : An illustration of the selected key will be displayed
Job List
Setting/ • The default setting is Setting Value.
Procedure
B. Scan Basic Screen Default Seeing
• It will not be displayed when the following setting shows that Authentication Device is
mounted.
[Service Mode] → [Billing Setting] → [Management Function Choice]
(1) Default Tab
Functions • To set the Basic Screen display in Scanner mode.
Use • To change the Basic Screen display in Scanner mode.
Setting/ • The default setting is Program.
Procedure
Enable
: The list of job which are being executed will be displayed
"Setting Value"
"Program" Group
"Disable"
"2" (0 to 4)
Job List
Address Book Direct Input
8. Utility Mode
189