Manual Adjust: Main Scanning Direction Image Scan Position Adjustment - Konica Minolta bizhub C250 Service Manual

Hide thumbs Also See for bizhub C250:

Table of Contents

Field Service Ver. 1.0 Jul. 2005

Manual adjust: Main Scanning Direction Image scan position adjustment

Adjusted range: -3 mm to + 3 mm

A. Adjustment procedure

1. Set the mode to the Service Mode.

2. Touch [ADF].

3. Touch [Original Stop Position].

4. Select [Main Scanning Direction].

5. Enter the value from the ten-key pad. (Press the ID key to change the code.)

4582fs3518c0

8. Mechanical adjustment

• To scan the image in the direction of

C, set the code to -.

• To shift the image in the direction of D,

set the code to +.

6. Touch [END].

4582F3E525DA

Table of Contents