Konica Minolta bizhub C250 Service Manual page 238

Field Service Ver. 3.0 Aug. 2006
H. Specify Default Tray when APS Off
Functions • To set the Tray to be used when APS is cancelled.
Use • To set the Tray for the initial setting when APS is cancelled.
Setting/ • The default setting is Tray (Tray 1) Before APS OFF.
Procedure
I. Select Tray for Insert Sheet
Functions
• To select the default setting of the Tray for Cover sheet paper.
Use
Setting/
• The default setting is Tray 2.
Procedure
J. Print Setting for Separate Scan
2
Functions • To set the output mode at Separate Scan setting.
Use • To print all at once after reading all data.
Auto Print : Print consecutively during the read operation.
Batch print : Print all at once after reading all data.
Setting/ • The default setting is Auto Print.
Procedure
K. Print Jobs During Copy Operation
Functions • To set whether to accept the printing job for Print data or Fax data during copy opera-
tion.
Use • To refuse Print data or Fax data during copy operation.
Accept
Receive Only : Print data or Fax data will be printed when the copy operation is fin-
Setting/ • The default setting is Accept.
Procedure
"Tray Before APS ON"
Copy setting can be changed after the read operation.
"Auto Print"
: Receives the Print data or Fax data to print.
ished.
"Accept"
8. Utility Mode
Default Tray
Batch Print
Receive Only
195