Konica Minolta bizhub C250 Service Manual page 851

3. Other
[2]
[3]
[1]
[2]
40
[1]
9J08F2C027DA
[2]
9J08F2C028DA
[1]
9J08F2C029DB
Field Service Ver. 1.0 Aug. 2006
17. Remove two screws [1] and remove
elevator mounting plate (front) [2].
18. Remove two screws [1] and remove
the belt holder [2].
19. Remove the timing belt (front) [3].
B. Adjustment of lever installation
position
1. Install all components excepting for
elevator motor assy.
NOTE
• Fit the hole of the elevator mount-
ing plate (front/back) [1] and the
hole of the elevator tray [2], and
install them by fixing the front and
back along.